AQUABLEND –DS
DESCALING CHEMICAL
AQUABLEND-DS is designed to remove the scaling& corrosion products from boiler& cooling water circuits , heat changers etc. It is a liquid formulation to remove hardness & low concentrated silica scales that can be removed offline by circulating its dilute solution of the chemical. It is a balance formulation of Hydrochloric Acid, Dispersant Wetting Agents & Corrosion Inhibitor.
BENEFITS
POWERFUL DESCALENT. |
AQUABLEND-DS is safe & non-corrosive for descaling ,it dissolves hardness scales quickly & complectly.. |
SAFE FOR METALS . |
AQUABLEND-DS contains a synthetic polymeric corrossion inhibitor which forms protective film on the parent metal surface to prevent acid attack . |
DETERGENT ACTION . |
AQUABLEND-DS contains a wetting agent which emulsifies oil grease present in the deposits. The detergent action of Aquablend-DS loosens dirt ,silt,algae etc which can be removed during water flushing. |
APPLICATION. |
AQUABLEND- DS should be dosed in 5-10 % solution in water . warm water may be used for faster action . normally the quantity of scale required depends upon the operating condition quantity of scales and hold up , Numatik Engineers Pvt Ltd will provide technical assistance to setup optimum dosage according to operating conditions and system. |
STORAGE & HANDLING |
AQUABLEND-DS should be stored in an air tight container away from direct heat. Always store at cool & dry place.. Wash thoroughly with water in case of contact. Do not swallow. |
AQUABLEND-DS is available in 35 Kg. HDPE CARBOY. |
|